Solution to flanging of PE pipes during welding

The reason why PE pipes are widely used by people is mainly due to their excellent performance.Recently,many people have reported encountering flanging during the welding process of pipes.If the situation is not resolved in a timely manner,it may affect their normal use.Next,we will briefly understand the specific reasons for flanging.
If the problem of pipe flanging is not resolved in a timely manner,it is likely to cause certain pressure on our drainage project,leading to the accumulation of some sediment and reducing the efficiency of water flow operation.Normally,these situations are caused by the uneven position of the PE pipe opening,which results in a very uneven heating surface during welding.Therefore,it is necessary to melt it again for treatment.
The reasons for the flanging of PE pipes vary depending on the severity.For example,when the flanging is relatively small,it is usually caused by insufficient heat absorption time during welding or insufficient travel of the welding machine base;If the flanging is too large,it may be due to the prolonged heat absorption time of the pipe material,resulting in external melting of the product and causing the flanging situation.
The above introduces the reasons and treatment methods for flanging PE pipes during welding.In order not to affect the normal use of the pipes in the later stage,we hope that everyone can learn more about the relevant knowledge of PE pipes.